Adding A Radius Server - ZyXEL Communications ZyWALL USG 200 Series User Manual

44.3.1 Adding a RADIUS Server

Click Configuration > Object > AAA Server > RADIUS to display the RADIUS
screen. Click the Add icon or an Edit icon to display the following screen. Use this
screen to create a new AD or LDAP entry or edit an existing one.
Figure 511 Configuration > Object > AAA Server > RADIUS > Add
The following table describes the labels in this screen.
Table 215 Configuration > Object > AAA Server > RADIUS > Add
LABEL
Name
Description
Server
Address
Authentication
Port
Backup Server
Address
Backup
Authentication
Port
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Enter a descriptive name (up to 63 alphanumerical characters) for
identification purposes.
Enter the description of each server, if any. You can use up to 60
printable ASCII characters.
Enter the address of the RADIUS server.
Specify the port number on the RADIUS server to which the ZyWALL
sends authentication requests. Enter a number between 1 and 65535.
If the RADIUS server has a backup server, enter its address here.
Specify the port number on the RADIUS server to which the ZyWALL
sends authentication requests. Enter a number between 1 and 65535.
Chapter 44 AAA Server
763