ZyXEL Communications ZyWALL USG 200 Series User Manual page 248

Chapter 10 Monitor
• Number of bytes transmitted (so far)
• Duration (so far)
You can look at all the active sessions by user, service, source IP address, or
destination IP address. You can also filter the information by user, protocol /
service or service group, source address, and/or destination address and view it
by user.
Click Monitor > System Status > Session Monitor to display the following
screen.
Figure 236 Monitor > System Status > Session Monitor
The following table describes the labels in this screen.
Table 34 Monitor > System Status > Session Monitor
LABEL
View
Refresh
248
DESCRIPTION
Select how you want the information to be displayed. Choices are:
sessions by users - display all active sessions grouped by user
sessions by services - display all active sessions grouped by service or
protocol
sessions by source IP - display all active sessions grouped by source
IP address
sessions by destination IP - display all active sessions grouped by
destination IP address
all sessions - filter the active sessions by the User, Service, Source
Address, and Destination Address, and display each session
individually (sorted by user).
Click this button to update the information on the screen. The screen
also refreshes automatically when you open and close the screen.
The User, Service, Source Address, and Destination Address fields
display if you view all sessions. Select your desired filter criteria and click
the Search button to filter the list of sessions.
ZyWALL USG 100/200 Series User's Guide