Signature Searching - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 33 Anti-Virus
column's heading cell to sort the table entries by that column's criteria. Click the
heading cell again to reverse the sort order.
Figure 426 Configuration > Anti-X > Anti-Virus > Black/White List > White List
The following table describes the labels in this screen.
Table 156 Configuration > Anti-X > Anti-Virus > Black/White List > White List
LABEL
Enable White
List
Add
Edit
Remove
Activate
Inactivate
Status
#
File Pattern
Apply
Reset

33.6 Signature Searching

Click Configuration > Anti-X > Anti-Virus > Signature to display this screen.
Use this screen to locate signatures and display details about them.
590
DESCRIPTION
Select this check box to have the ZyWALL not perform the anti-virus
check on files with names that match the white list patterns.
Use the white list to have the ZyWALL not perform the anti-virus check
on files with names that match the white list patterns.
Click this to create a new entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
The activate (light bulb) icon is lit when the entry is active and dimmed
when the entry is inactive.
This is the entry's index number in the list.
This is the file name pattern. If a file's name matches this pattern, the
ZyWALL does not check the file for viruses.
Click Apply to save your changes.
Click Reset to return the screen to its last-saved settings.
ZyWALL USG 100/200 Series User's Guide