ZyXEL Communications ZyWALL USG 200 Series User Manual page 992

Appendix A Log Descriptions
Table 303 Port Grouping Logs
LOG MESSAGE
Interface %s links up
because of changing
Port Group. Enable
DHCP client.
Interface %s links
down because of
changing Port Group.
Disable DHCP client.
Port Group on %s is
changed. Renew DHCP
client.
Port Grouping %s has
been changed.
Table 304 Force Authentication Logs
LOG MESSAGE
Force User
Authentication will be
enabled due to http
server is enabled.
Force User
Authentication will be
disabled due to http
server is disabled.
Force User
Authentication may not
work properly!
Table 305 File Manager Logs
LOG MESSAGE
ERROR:#%s, %s
WARNING:#%s, %s
992
DESCRIPTION
An administrator used port-grouping to assign a port to a
representative Interface and this representative interface is
set to DHCP client and only has one member. In this case the
DHCP client will be enabled. %s: interface name.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is
set to DHCP client and has no members in its group. In this
case the DHCP client will be disabled. %s: interface name.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is
set to DHCP client and has more than one member in its
group. In this case the DHCP client will renew. %s: interface
name.
An administrator configured port-grouping, %s: interface
name.
DESCRIPTION
Force user authentication will be turned on because HTTP
server was turned on.
Force user authentication will be turned off because HTTP
server was turned off.
DESCRIPTION
Apply configuration failed, this log will be what CLI command
is and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Apply configuration failed, this log will be what CLI command
is and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
ZyWALL USG 100/200 Series User's Guide