ZyXEL Communications ZyWALL USG 200 Series User Manual page 58

Chapter 3 Web Configurator
settings reference the object. The following example shows which configuration
settings reference the ldap-users user object (in this case the first firewall rule).
Figure 18 Object Reference
The fields vary with the type of object. The following table describes labels that
can appear in this screen.
Table 8 Object References
LABEL
Object Name
#
Service
Priority
Name
Description
Refresh
Cancel
58
DESCRIPTION
This identifies the object for which the configuration settings that use it
are displayed. Click the object's name to display the object's
configuration screen in the main window.
This field is a sequential value, and it is not associated with any entry.
This is the type of setting that references the selected object. Click a
service's name to display the service's configuration screen in the main
window.
If it is applicable, this field lists the referencing configuration item's
position in its list, otherwise N/A displays.
This field identifies the configuration item that references the object.
If the referencing configuration item has a description configured, it
displays here.
Click this to update the information in this screen.
Click Cancel to close the screen.
ZyWALL USG 100/200 Series User's Guide