Starting And Stopping The Zywall - ZyXEL Communications ZyWALL USG 200 Series User Manual

Web Configurator
The Web Configurator allows easy ZyWALL setup and management using an
Internet browser. This User's Guide provides information about the Web
Configurator.
Figure 4 Managing the ZyWALL: Web Configurator
Command-Line Interface (CLI)
The CLI allows you to use text-based commands to configure the ZyWALL. You can
access it using remote management (for example, SSH or Telnet) or via the
console port. See the Command Reference Guide for more information about the
CLI.
Console Port
You can use the console port to manage the ZyWALL using CLI commands. See
the Command Reference Guide for more information about the CLI.
The default settings for the console port are as follows.
Table 2 Console Port Default Settings
SETTING
Speed
Data Bits
Parity
Stop Bit
Flow Control

1.5 Starting and Stopping the ZyWALL

Here are some of the ways to start and stop the ZyWALL.
ZyWALL USG 100/200 Series User's Guide
VALUE
115200 bps
8
None
1
Off
Chapter 1 Introducing the ZyWALL
37