ZyXEL Communications ZyWALL USG 200 Series User Manual page 573

Click AppPatrol > Other to open the Other (applications) screen.
Figure 419 AppPatrol > Other
The following table describes the labels in this screen. See
575 for more information as well.
Table 150 AppPatrol > Other
LABEL
Add
Edit
Remove
Activate
Inactivate
Move
Status
#
Port
Schedule
User
From
To
Source
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Click this to create a new entry. Select an entry and click Add to create a
new entry after the selected entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To change an entry's position in the numbered list, select it and click
Move to display a field to type a number for where you want to put that
entry and press [ENTER] to move the entry to the number that you
typed.
The activate (light bulb) icon is lit when the entry is active and dimmed
when the entry is inactive.
This field is a sequential value, and it is not associated with a specific
condition.
Note: The ZyWALL checks conditions in the order they appear in
the list. While this sequence does not affect the functionality,
you might improve the performance of the ZyWALL by putting
more common conditions at the top of the list.
This field displays the specific port number to which this policy applies.
This is the schedule that defines when the policy applies. any means the
policy always applies.
This is the user name or user group to which the policy applies. If any
displays, the policy applies to all users.
This is the source zone of the traffic to which this policy applies.
This is the destination zone of the traffic to which this policy applies.
This is the source address or address group for whom this policy applies.
If any displays, the policy is effective for every source.
Chapter 32 Application Patrol
Section 32.4.1 on page
573