User Group Summary Screen - ZyXEL Communications ZyWALL USG 200 Series User Manual

Table 194 Configuration > User/Group > User > Add (continued)
LABEL
Reauthentication
Time
Configuration
Validation
OK
Cancel

40.3 User Group Summary Screen

User groups consist of access users and other user groups. You cannot put admin
users in user groups. The Group screen provides a summary of all user groups. In
addition, this screen allows you to add, edit, and remove user groups. To access
this screen, login to the Web Configurator, and click Configuration > Object >
User/Group > Group.
Figure 487 Configuration > Object > User/Group > Group
The following table describes the labels in this screen. See
728 for more information as well.
Table 195 Configuration > Object > User/Group > Group
LABEL
Add
Edit
Remove
Object
References
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
This field is not available if you select the ext-group-user type.
Type the number of minutes this user can be logged into the ZyWALL
in one session before the user has to log in again. You can specify 1 to
1440 minutes. You can enter 0 to make the number of minutes
unlimited. Unlike Lease Time, the user has no opportunity to renew
the session without logging out.
Use a user account from the group specified above to test if the
configuration is correct. Enter the account's user name in the User
Name field and click Test.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so. Removing a group does not
remove the user accounts in the group.
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
an example.
Chapter 40 User/Group
Section 40.3.1 on page
Section 13.3.2 on page 306 for
727