The One-Time Schedule Add/Edit Screen - ZyXEL Communications ZyWALL USG 200 Series User Manual

Table 209 Configuration > Object > Schedule (continued)
LABEL
Recurring
Add
Edit
Remove
Object
References
#
Name
Start Time
Stop Time

43.2.1 The One-Time Schedule Add/Edit Screen

The One-Time Schedule Add/Edit screen allows you to define a one-time
schedule or edit an existing one. To access this screen, go to the Schedule screen
(see Section 43.2 on page
the One Time section.
Figure 503 Configuration > Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Table 210 Configuration > Object > Schedule > Edit (One Time)
LABEL
Configuration
Name
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
an example.
This field is a sequential value, and it is not associated with a specific
schedule.
This field displays the name of the schedule, which is used to refer to the
schedule.
This field displays the time at which the schedule begins.
This field displays the time at which the schedule ends.
750), and click either the Add icon or an Edit icon in
DESCRIPTION
Type the name used to refer to the one-time schedule. You may use 1-
31 alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
Chapter 43 Schedules
Section 13.3.2 on page 306
), or dashes (-), but the first
_
for
751