ZyXEL Communications ZyWALL USG 200 Series User Manual page 875

The following table describes the labels in this screen.
Table 255 Configuration > Log & Report > Log Setting > Edit (Remote Server)
LABEL
Log Settings
for Remote
Server
Active
Log Format
Server
Address
Log Facility
Active Log
Selection
#
Log
Category
Selection
OK
Cancel
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Select this check box to send log information according to the
information in this section. You specify what kinds of messages are
included in log information in the Active Log section.
This field displays the format of the log information. It is read-only.
VRPT/Syslog - ZyXEL's Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
Type the server name or the IP address of the syslog server to which to
send log information.
Select a log facility. The log facility allows you to log the messages to
different files in the syslog server. Please see the documentation for your
syslog program for more information.
Use the Selection drop-down list to change the log settings for all of the
log categories.
disable all logs (red X) - do not send the remote server logs for any log
category.
enable normal logs (green check mark) - send the remote server log
messages and alerts for all log categories.
enable normal logs and debug logs (yellow check mark) - send the
remote server log messages, alerts, and debugging information for all
log categories.
This field is a sequential value, and it is not associated with a specific
address.
This field displays each category of messages. It is the same value used
in the Display and Category fields in the View Log tab. The Default
category includes debugging messages generated by open source
software.
Select what information you want to log from each Log Category
(except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green checkmark) - log regular information and
alerts from this category
enable normal logs and debug logs (yellow check mark) - log regular
information, alerts, and debugging information from this category
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
Chapter 51 Log and Report
875