The Vpn Gateway Screen - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 25 IPSec VPN

25.3 The VPN Gateway Screen

The VPN Gateway summary screen displays the IPSec VPN gateway policies in
the ZyWALL, as well as the ZyWALL's address, remote IPSec router's address, and
associated VPN connections for each one. In addition, it also lets you activate and
deactivate each VPN gateway.
To access this screen, click Configuration > VPN > Network > IPSec VPN >
VPN Gateway. The following screen appears.
Figure 356 Configuration > VPN > IPSec VPN > VPN Gateway
Each field is discussed in the following table. See
more information.
Table 129 Configuration > VPN > IPSec VPN > VPN Gateway
LABEL
Add
Edit
Remove
Activate
Inactivate
Object
References
#
Status
Name
My address
Secure Gateway
VPN Connection
486
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
for an example.
This field is a sequential value, and it is not associated with a specific
VPN gateway.
The activate (light bulb) icon is lit when the entry is active and dimmed
when the entry is inactive.
This field displays the name of the VPN gateway
This field displays the interface or a domain name the ZyWALL uses for
the VPN gateway.
This field displays the IP address(es) of the remote IPSec routers.
This field displays VPN connections that use this VPN gateway.
Section 25.3.1 on page 487
Section 13.3.2 on page 306
ZyWALL USG 100/200 Series User's Guide
for