The Idp General Screen - ZyXEL Communications ZyWALL USG 200 Series User Manual

34.2 The IDP General Screen

Click Configuration > Anti-X > IDP > General to open this screen. Use this
screen to turn IDP on or off, bind IDP profiles to traffic directions, and view
registration and signature information.
Note: You must register in order to use packet inspection signatures. See the
Registration screens.
If you try to enable IDP when the IDP service has not yet been registered, a
warning screen displays and IDP is not enabled.
Figure 428 Configuration > Anti-X > IDP > General
The following table describes the screens in this screen.
Table 159 Configuration > Anti-X > IDP > General
LABEL
General Settings
Enable
Signature
Detection
Policies
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
You must register for IDP service in order to use packet inspection
signatures. If you don't have a standard license, you can register for
a once-off trial one.
Use this list to specify which IDP profile the ZyWALL uses for traffic
flowing in a specific direction. Edit the policies directly in the table.
Chapter 34 IDP
597