User /Group Technical Reference - ZyXEL Communications ZyWALL USG 200 Series User Manual

40.5 User /Group Technical Reference

This section provides some information on users who use an external
authentication server in order to log in.
Setting up User Attributes in an External Server
To set up user attributes, such as reauthentication time, in LDAP or RADIUS
servers, use the following keywords in the user configuration file.
Table 200 LDAP/RADIUS: Keywords for User Attributes
KEYWORD
type
leaseTime
reauthTime
The following examples show you how you might set up user attributes in LDAP
and RADIUS servers.
Figure 492 LDAP Example: Keywords for User Attributes
type: admin
leaseTime: 99
reauthTime: 199
Figure 493 RADIUS Example: Keywords for User Attributes
type=user;leaseTime=222;reauthTime=222
Creating a Large Number of Ext-User Accounts
If you plan to create a large number of Ext-User accounts, you might use CLI
commands, instead of the Web Configurator, to create the accounts. Extract the
user names from the LDAP or RADIUS server, and create a shell script that creates
the user accounts. See
scripts.
ZyWALL USG 100/200 Series User's Guide
CORRESPONDING ATTRIBUTE IN WEB CONFIGURATOR
User Type. Possible Values: admin, limited-admin, user, guest.
Lease Time. Possible Values: 1-1440 (minutes).
Reauthentication Time. Possible Values: 1-1440 (minutes).
Chapter 52 on page 879
Chapter 40 User/Group
for more information about shell
735