Wan And Isp Connection Settings - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 5 Quick Setup
• IP Address Assignment: Select Auto If your ISP did not assign you a fixed IP
address.
Select Static If the ISP assigned a fixed IP address.

5.2.4 WAN and ISP Connection Settings

Use this screen to configure the ISP and WAN interface settings. This screen is
read-only if you set the IP Address Assignment to Static.
Note: Enter the Internet access information exactly as your ISP gave it to you.
Figure 41 WAN and ISP Connection Settings: (PPTP Shown)
The following table describes the labels in this screen.
Table 10 WAN and ISP Connection Settings
LABEL
ISP Parameter
Encapsulation
76
DESCRIPTION
This section appears if the interface uses a PPPoE or PPTP Internet
connection.
This displays the type of Internet connection you are configuring.
ZyWALL USG 100/200 Series User's Guide