Configuring L2Tp Vpn In Windows Vista, Xp, Or 2000; Configuring L2Tp In Windows Vista - ZyXEL Communications ZyWALL USG 200 Series User Manual

• The other fields are left to the defaults in this example, click Apply.
Figure 157 Configuration > VPN > L2TP VPN Example
8.5 Configuring L2TP VPN in Windows Vista, XP,
or 2000
The following sections cover how to configure L2TP in remote user computers
using Windows Vista, XP, and 2000. The example settings in these sections go
along with the L2TP VPN configuration example in
Before you configure the client, issue one of the following commands from the
Windows command prompt to make sure the computer is running the Microsoft
IPSec service. Make sure you include the quotes.
• For Windows XP. use net start "ipsec services".
• For Windows 2000, use net start "ipsec policy agent".

8.5.1 Configuring L2TP in Windows Vista

In Windows Vista do the following to establish an L2TP VPN connection.
Click Start > Network > Network and Sharing Center > Set up a
1
connection or network.
ZyWALL USG 100/200 Series User's Guide
Chapter 8 L2TP VPN Example
Section 8.1 on page 185.
189