Chapter 22 IP/MAC Binding
22.1.2 What You Need to Know
DHCP
IP/MAC address bindings are based on the ZyWALL's dynamic and static DHCP
entries.
Interfaces Used With IP/MAC Binding
IP/MAC address bindings are grouped by interface. You can use IP/MAC binding
with Ethernet, bridge, VLAN, and WLAN interfaces. You can also enable or disable
IP/MAC binding and logging in an interface's configuration screen.
22.2 IP/MAC Binding Summary
Click Configuration > Network > IP/MAC Binding to open the IP/MAC
Binding Summary screen. This screen lists the total number of IP to MAC
address bindings for devices connected to each supported interface.
Figure 330 Configuration > Network > IP/MAC Binding > Summary
The following table describes the labels in this screen.
Table 111 Configuration > Network > IP/MAC Binding > Summary
LABEL
Edit
Activate
Inactivate
440
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
ZyWALL USG 100/200 Series User's Guide