ZyXEL Communications ZyWALL USG 200 Series User Manual page 448

Chapter 23 Authentication Policy
The following table gives an overview of the objects you can configure.
Table 115 Configuration > Auth. Policy
LABEL
Enable
Authentication
Policy
Exceptional
Services
Authentication
Policy
Summary
Add
Edit
Remove
Activate
Inactivate
Move
448
DESCRIPTION
Select this to turn on the authentication policy feature.
Use this table to list services that users can access without logging in.
Click Add to change the list's membership. A screen appears. Available
services appear on the left. Select any services you want users to be
able to access without logging in and click the right arrow button to add
them. The member services are the right. Select any service that you
want to remove from the member list, and click the left arrow button to
remove them.
Keeping DNS as a member allows users' computers to resolve domain
names into IP addresses.
Figure 336 Configuration > Auth. Policy > Add Exceptional
Service
In the table, select one or more entries and click Remove to delete it or
them.
Use this table to manage the ZyWALL's list of authentication policies.
Click this to create a new entry. Select an entry and click Add to create
a new entry after the selected entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To move an entry to a different number in the list, click the Move icon.
In the field that appears, specify the number to which you want to move
the interface.
ZyWALL USG 100/200 Series User's Guide