Quick Setup Interface Wizard: Summary - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 5 Quick Setup
Table 10 WAN and ISP Connection Settings (continued)
LABEL
First DNS
Server
Second DNS
Server
Back
Next

5.2.5 Quick Setup Interface Wizard: Summary

This screen displays the WAN interface's settings.
Figure 42 Interface Wizard: Summary WAN (PPTP Shown)
The following table describes the labels in this screen.
Table 11 Interface Wizard: Summary WAN
LABEL
Encapsulation
Service Name
Server IP
78
DESCRIPTION
These fields only display for an interface with a static IP address.
Enter the DNS server IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS
servers. If you do not configure a DNS server, you must know the IP
address of a machine in order to access it.
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. The DNS server is extremely
important because without it, you must know the IP address of a
computer before you can access it. The ZyWALL uses a system DNS
server (in the order you specify here) to resolve domain names for
VPN, DDNS and the time server.
Click Back to return to the previous screen.
Click Next to continue.
DESCRIPTION
This displays what encapsulation this interface uses to connect to the
Internet.
This field only appears for a PPPoE interface. It displays the PPPoE
service name specified in the ISP account.
This field only appears for a PPTP interface. It displays the IP address of
the PPTP server.
ZyWALL USG 100/200 Series User's Guide