Buffer (Configuration) - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)
Hide thumbs Also See for Force10 Z9000:
Table of Contents

Advertisement

Command Modes
BUFFER PROFILE
Command History
Version 7.7.1.0
Version 7.6.1.0
Related
buffer-profile (Configuration)
Commands

buffer (Configuration)

Apply a buffer profile to all Field or Switch Fabric processors in a port-pipe.
C-Series, S-Series
Syntax
buffer [csf | fp-uplink] linecard slot port-set port-pipe
buffer-policy buffer-profile
Parameters
csf
fp-uplink
linecard slot
port-set
buffer-policy
buffer-profile
Defaults
none
Command Modes
BUFFER PROFILE
Command History
Version 7.7.1.0
Version 7.6.1.0
Usage
If you attempt to apply a buffer profile to a non-existent port-pipe, FTOS displays the following
Information
message. However, the configuration still appears in the running-config.
%DIFFSERV-2-DSA_BUFF_CARVING_INVALID_PORT_SET: Invalid FP port-
set 2 for linecard 2. Valid range of port-set is <0-1>
When you remove a buffer-profile using the no buffer-profile [fp | csf]
command from CONFIGURATION mode, the buffer-profile name still appears in the output of
show buffer-profile [detail | summary]. After a line card reset, the buffer
profile correctly returns to the default values, but the profile name remains. Remove it from the
show buffer-profile [detail | summary] command output by entering no
buffer [fp-uplink | csf] linecard port-set buffer-policy from
CONFIGURATION mode and no buffer-policy from INTERFACE mode.
Introduced on the S-Series.
Introduced on the C-Series.
– creates a buffer profile that can be applied to an interface.
Enter the keyword csf to apply a buffer profile to all Switch Fabric
processors in a port-pipe.
Enter the keyword fp-uplink to apply a buffer profile to all Field
Processors in a a port-pipe.
Enter the keyword linecard followed by the line card slot number.
port-pipe
Enter the keywords port-set followed by the port-pipe number.
The range is 0 to 3 on the C-Series and 0 to 1 on the S-Series.
Enter the keywords buffer-policy followed by the name of a
buffer profile you created.
Introduced on the S-Series.
Introduced on the C-Series.
575

Advertisement

Table of Contents
loading

Table of Contents