Show Config - Dell Force10 Z9000 Reference Manual
Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)
Hide thumbs
Also See for Force10 Z9000:
- Configuration manual (984 pages) ,
- Manual (56 pages) ,
- Quick start manual (25 pages)
Table of Contents
Advertisement
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0
Usage
The output of the show interfaces command displays the configured rate interval, along
Information
with the collected traffic data.
Related
show interfaces
Commands
show config
Display the interface configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show config
Command Modes
INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.0
Example
FTOS(conf-if)#show conf
!
interface GigabitEthernet 1/7
FTOS(conf-if)#
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
– displays information on physical and virtual interfaces.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
no ip address
switchport
no shutdown
719
Advertisement
Table of Contents
