Dell Force10 Z9000 Reference Manual page 1284

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

Version 7.5.1.0

Version 6.5.1.0

By default, FTOS implements an optimized flush mechanism for RSTP. This helps in flushing

MAC addresses only when necessary (and less often), allowing for faster convergence during

topology changes. However, if a standards-based flush mechanism is needed, you can turn on

notification.

Introduced on the C-Series.

Introduced on the E-Series.

knob command to enable flushing MAC addresses after receiving every topology change