Debug Ip Bgp Events - Dell Force10 Z9000 Reference Manual

To disable debugging, use the no debug ip bgp ipv6 unicast dampening
command.
Parameters
in
out
Command Modes EXEC Privilege
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage Enter the no debug ip bgp command to remove all configured debug commands for BGP.
Information
Related show ip bgp dampened-paths
Commands

debug ip bgp events

Allows you to view information on local BGP state changes and other BGP events.
C-Series, E-Series
Syntax debug ip bgp [ipv6-address | peer-group peer-group-name] events
[in | out]
To disable debugging, use the no debug ip bgp ipv6-address | peer-group
peer-group-name] events command.
Parameters
ipv6-address
peer-group
group-name
in
out
Command Modes EXEC Privilege
Command History
Version 8.2.1.0
Version 7.4.1.0
(OPTIONAL) Enter the keyword in to view only information on
inbound dampened routes.
(OPTIONAL) Enter the keyword out to view only information on
outbound dampened routes.
Introduced on the E-Series ExaScale.
Introduced
– View BGP dampened routes.
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-
(OPTIONAL) Enter the keywords peer-group followed by the name
of the peer group.
(OPTIONAL) Enter the keyword in to view only information on
inbound BGP routes.
(OPTIONAL) Enter the keyword out to view only information on
outbound BGP routes.
Introduced on the E-Series ExaScale.
Introduced
473