Snmp-Server Group - Dell Force10 Z9000 Reference Manual

show running-config

snmp-server group

Configure a new SNMP group or a table that maps SNMP users to SNMP views.
C-Series, E-Series, S-Series, Z-Series
Syntax snmp-server group [group_name {1 | 2c | 3 {auth | noauth |
priv}}] [read name] [write name] [notify name] [access access-
list-name | ipv6 access-list-name | access-list-name ipv6
access-list-name]]
To remove a specified group, use the no snmp-server group [group_name {v1 |
v2c | v3 {auth | noauth | priv}}] [read name] [write name]
[notify name] [access access-list-name | ipv6 access-list-name
| access-list-name ipv6 access-list-name]] command.
Parameters
group_name
1 | 2c | 3
auth
noauth
priv
read
write
1370
snmp – displays the SNMP running configuration.
Enter a text string (up to 20 characters long) as the name of the group.
The following groups are created for mapping to read/write
community/security-names (defaults):
•
•
(OPTIONAL) Enter the security model version number (1, 2c, or 3):
•
•
•
The default is 1.
(OPTIONAL) Enter the keyword auth to specify authentication of a
packet without encryption.
(OPTIONAL) Enter the keyword noauth to specify no authentication
of a packet.
(OPTIONAL) Enter the keyword priv to specify both authentication
and then scrambling of the packet.
name
(OPTIONAL) Enter the keyword read followed by a name (a string of
up to 20 characters long) as the read view name. The default is
GlobalView and is assumed to be every object belonging to the
Internet (1.3.6.1) OID space.
name (OPTIONAL) Enter the keyword write followed by a name (a string
of up to 20 characters long) as the write view name.
v1v2creadg — maps to a community/security-name with
ro permissions.
1v2cwriteg — maps to a community/security-name rw
permissions.
1 is the least secure version.
3 is the most secure of the security modes.
2c allows transmission of informs and counter 64, which
allows for integers twice the width of what is normally
allowed.