Dell Force10 Z9000 Reference Manual page 1017

(165.87.1.7, 225.1.2.1), uptime 00:03:17
Usage The following describes the show ip mroute command shown in the Example below.
Information
Field
(S, G)
uptime
Incoming interface
Outgoing interface
list:
Example
FTOS#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
(1.13.1.100, 224.10.10.1), uptime 00:04:03
(*, 224.20.20.1), uptime 00:05:12
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
GigabitEthernet 4/20
Description
Displays the forwarding entry in the multicast route table.
Displays the amount of time the entry has been in the multicast
forwarding table.
Displays the reverse path forwarding (RPF) information towards the
source for (S,G) entries and the RP for (*,G) entries.
Lists the interfaces that meet one of the following:
•
•
•
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/13
Incoming interface: GigabitEthernet 3/4
Outgoing interface list:
GigabitEthernet 3/12
GigabitEthernet 3/13
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/4
a directly connected member of the Group
statically configured member of the Group
received a (*,G) or (S,G) Join message
1017