show ip bgp ipv6 unicast inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are announced from
the same neighbor AS but with a different AS-Path.
C-Series, E-Series
Syntax
show ip bgp ipv6 unicast inconsistent-as
Command Modes
Command History
Version 8.2.1.0
Version 7.4.1.0
show ip bgp ipv6 unicast neighbors
Allows you to view the information exchanged by BGP neighbors.
C-Series, E-Series
Syntax
show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length
| ip-address] [advertised-routes | dampened-routes | detail |
flap-statistics | routes]
Parameters
ipv6-address
prefix-length | ip-
address
advertised-routes
dampened-routes
detail
flap-statistics
routes
Command Modes
506
•
EXEC
•
EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros or enter an IP address in dotted decimal format to reset all
prefixes from that neighbor.
(OPTIONAL) Enter the keywords advertised-routes to view
only the routes the neighbor sent.
(OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
(OPTIONAL) Enter the keyword detail to view neighbor-specific
internal information for the IPv6 address family.
(OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor's routes.
(OPTIONAL) Enter the keyword routes to view only the neighbor's
feasible routes.
•
EXEC
•
EXEC Privilege