Dell Force10 Z9000 Reference Manual page 554

summary
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.2.1.0
Version 7.9.1.0
Version 6.3.1.0
Usage If the CAM profile has been changed, this command displays the current CAM profile setting in
Information one column and in the other column displays the CAM profile and the microcode that is
configured for the chassis and all online line cards after the next reboot.
Example
FTOS#show cam-profile summary
(summary)
-- Chassis CAM Profile --
Profile Name
MicroCode Name : Default
-- Line card 1 --
Profile Name
MicroCode Name : Default
-- Line card 6 --
Profile Name
MicroCode Name : Default
FTOS#
Example
FTOS#show cam-profile
-- Chassis Cam Profile --
CamSize
554
• Enter the keywords lag-hash-mpls to select the
microcode for hashing based on MPLS labels (up to five
labels deep).
• Enter the keywords ipv6-extacl to select the microcode
for IPv6.
• Enter the keywords acl-group to select the microcode for
applications that need 16k egress IPv4 ACLs.
• Enter the keywords ipv4-vrf to select the microcode for
IPv4 VRF applications.
• Enter the keywords ipv4-v6-vrf to select the microcode
for IPv4 and IPv6 VRF applications.
• Enter the keyword ipv4-64k-ipv6 to specify the CAM
profile that provides an alternate to ipv6-extacl that
redistributes CAM space from the IPv4FIB to IPv4Flow and
IPv6FIB.
(OPTIONAL) Enter the keyword summary to view a summary listing
of the CAM profile and microcode on the chassis and all line cards.
Added support for the ipv4-64k-ipv6 profile.
Added support for the VRF protocols.
Introduced on the E-Series.
: Current Settings : Next Boot
: Default
: Current Settings : Next Boot
: Default
: Current Settings : Next Boot
: Default
: 18-Meg
: Current Settings : Next Boot
: Default
: Default
: Default
: Default
: Default
: Default