Clear Ip Ospf; Clear Ip Ospf Statistics - Dell Force10 Z9000 Reference Manual

clear ip ospf

Clear all OSPF routing tables.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear ip ospf process-id [process]
Parameters
process-id
process
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1

clear ip ospf statistics

Clear the packet statistics in interfaces and neighbors.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear ip ospf process-id statistics [interface name {neighbor
router-id}]
Parameters
process-id
interface
Enter the OSPF Process ID to clear a specific process. If no Process
ID is entered, all OSPF processes are cleared.
(OPTIONAL) Enter the keyword process to reset the OSPF process.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the OSPF Process ID to clear a specific process. If no Process
ID is entered, all OSPF processes are cleared.
name
(OPTIONAL) Enter the keyword interface followed by one of the
following interface keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For Port Channel groups, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale.
• For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
1041