Neighbor Description; Neighbor Distribute-List - Dell Force10 Z9000 Reference Manual

Version 7.4.1.0
Usage If you apply a route map to a BGP peer or neighbor with the neighbor default-
Information
originate command configured, the software does not apply the set filters in the route map
to that BGP peer or neighbor.

neighbor description

Assign a character string describing the neighbor or group of neighbors (peer group).
C-Series, E-Series
Syntax neighbor {ipv6-address | peer-group-name} description text
To delete a description, use the no neighbor {ipv6-address | peer-group-
name} description text command.
Parameters
ipv6-address
peer-group-name
text
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.2.1.0
Version 7.4.1.0

neighbor distribute-list

Distribute BGP information via an established prefix list.
C-Series, E-Series
Syntax neighbor {ipv6-address | peer-group-name} distribute-list
prefix-list-name {in | out}
To delete a neighbor distribution list, use the no neighbor {ipv6-address | peer-
group-name} distribute-list prefix-list-name {in | out} command.
Parameters
ipv6-address
peer-group-name
482
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
Enter a continuous text string up to 80 characters.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Enter the name of the peer group.