Dell Force10 Z9000 Reference Manual page 1215

Parameters
linecard
port-set
interface
interface
summary
Defaults none
Command Modes EXEC
Command History
Version 7.4.1.0
Example
FTOS#show cam layer2-qos interface gigabitethernet 2/0
(Interface)
Cam Port Dot1p Proto SrcMac
DstMask
Index
------------------------------------------------
01817 0 - 0
00:00:00:00:ff:ff - - 7
01818 0 - 0
00:00:00:00:00:f0 - 45 5
01819 0 4 0
00:00:00:ff:00:00 4 - 4
01820 0 - 0x2000 00:00:00:00:00:00...00:00:00:00:00:b0
ff:ff:ff:ff:ff:ff - - 1
02047 0 - 0
00:00:00:00:00:00 - - 0
FTOS#
Example
FTOS#show cam layer2-qos linecard 2 port-set 0
(Linecard)
Cam Port Dot1p Proto SrcMac
DstMask
Index
---------------------------------------------------
01817 0 - 0
number
Enter the keyword linecard followed by the line card slot number.
For the E-Series, the range is 0 to 13 on a E1200, 0 to 6 on a E600/E600i,
and 0 to 5 on a E300.
number
Enter the keywords port-set followed by the line card's port pipe.
The range is 0 or 1.
Enter the keyword interface followed by one of the keywords
below and slot/port or number information:
•
•
•
•
(OPTIONAL) Enter the keyword summary to display only the total
number of CAM entries.
Introduced on the E-Series.
Dot1p DSCP Queue
Marking Marking
00:00:00:00:cc:cc...00:00:00:00:dd:dd
00:00:00:00:00:c0...00:00:00:00:00:d0
00:00:00:a0:00:00...00:00:00:b0:00:00
00:00:00:00:00:00...00:00:00:00:00:00
Dot1p DSCP Queue
Marking Marking
00:00:00:00:cc:cc...00:00:00:00:dd:dd
For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/port information.
For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
SrcMask
SrcMask
DstMac
DstMac
1215