Dell Force10 Z9000 Reference Manual page 731

Parameters
interface
Command Modes
Command History
Version 8.5.1.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage The following describes the show interfaces description command shown in the
Information
Example below.
Field
Interface
(Optional) Enter one of the following keywords and slot/port or
number information:
•
•
•
•
•
•
•
•
•
•
• EXEC
• EXEC Privilege
Added support for 4-port 40G line cards on ExaScale.
Added support for 4093 VLANs on the E-Series ExaScale. Prior
releases supported 2094.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the type of interface and associated slot and port number.
For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/port information.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For Loopback interfaces, enter the keyword loopback
followed by a number from 0 to 16383.
For the management interface on the RPM, enter the keyword
ManagementEthernet followed by the slot/port
information. The slot range is 0-1 and the port range is 0.
For the Null interface, enter the keywords null 0.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
For VLAN interfaces, enter the keyword vlan followed by a
number from 1 to 4094.
731