Object Missing; Ip Dhcp Snooping; Ip Dhcp Snooping Binding - Dell Force10 Z9000 Reference Manual

Object Missing

This object is not available in the repository.

ip dhcp snooping

Enable DHCP snooping globally.
C-Series, E-Series, Z-Series, S-Series
Syntax [no] ip dhcp snooping
Defaults Disabled
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.1.0
Version 8.2.1.0
Version 7.8.1.0
Usage
When enabled, no learning takes place until you enable snooping on a VLAN. After disabling
Information
DHCP snooping, the binding table deletes and Option 82, IP Source Guard, and Dynamic ARP
Inspection are disabled.
Introduced in FTOS version 7.8.1.0, DHCP snooping was available for Layer 3 only and
dependent on DHCP Relay Agent (ip helper-address). FTOS version 8.2.1.0 extends
DHCP Snooping to Layer 2. You do not have to enable relay agent to snoop on Layer 2
interfaces.
Related ip dhcp snooping vlan
Commands

ip dhcp snooping binding

Create a static entry in the DHCP binding table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax [no] ip dhcp snooping binding mac address vlan-id vlan-id ip
ip-address interface type slot/port lease number
Parameters
mac
vlan-id
ip
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the C-Series and S-Series on Layer 2 interfaces.
Introduced on the C-Series and S-Series on Layer 3 interfaces.
– enables DHCP snooping on one or more VLANs.
address Enter the keyword mac followed by the MAC address of the host to
which the server is leasing the IP address.
vlan-id
Enter the keywords vlan-id followed by the VLAN to which the
host belongs. The range is 2 to 4094.
ip-address
Enter the keyword ip followed by the IP address that the server is
leasing.
601