Buffer-Profile (Configuration) - Dell Force10 Z9000 Reference Manual

Related

buffer-profile (Configuration)

Commands
buffer-profile (Configuration)
Create a buffer profile that can be applied to an interface.
C-Series, S-Series, Z-Series
Syntax buffer-profile {{fp | csf} profile-name | global {1Q|4Q}
Parameters
fp
csf
profile-name
global
1Q
4Q
Defaults global 4Q
Command Modes CONFIGURATION
Command History
Version 8.3.11.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0
Usage
The buffer-profile global command fails if you have already applied a custom
Information
buffer-profile on an interface. Similarly, when you configure buffer-profile global,
you cannot not apply buffer-profile on any interface.
If the default buffer-profile (4Q) is active, FTOS displays an error message instructing you to
remove the default configuration using the no buffer-profile global command.
You must reload the system for the global buffer-profile to take effect.
Related
buffer (Buffer Profile)
Commands
or packet pointers to queues 0 to 3.
576
– creates a buffer profile that can be applied to an interface.
Enter the keyword fp to create a buffer profile for the Field
Processor.
Enter the keyword csf to create a buffer profile for the Switch Fabric
Processor.
Create a name for the buffer profile.
Apply one of two pre-defined buffer profiles to all of the port-pipes in
the system.
Enter the keyword 1Q to choose a pre-defined buffer profile for single
queue (for example, non-QoS) applications.
Enter the keyword 4Q to choose a pre-defined buff fer profile for four
queue (for example, QoS) applications.
Introduced on the Z9000.
Added the global keyword.
Introduced on the S-Series.
Introduced on the C-Series.
– allocates an amount of dedicated buffer space, dynamic buffer space,