Dell Force10 Z9000 Reference Manual page 1396

Message ID
%RPM0-P:CP %SNMP-4-RMON_HC_RISING_THRESHOLD: RMON
high-capacity rising threshold alarm from SNMP OID
<oid>
RMON_HC_FALLING_THRESHOLD
%RPM0-P:CP %SNMP-4-RMON_HC_FALLING_THRESHOLD: RMON
high-capacity falling threshold alarm from SNMP OID
<oid>
RESV
N/A
CHM_CARD_DOWN
%CHMGR-1-CARD_SHUTDOWN: %sLine card %d down - %s
%CHMGR-2-CARD_DOWN: %sLine card %d down - %s
CHM_CARD_UP
%CHMGR-5-LINECARDUP: %sLine card %d is up
CHM_CARD_MISMATCH
%CHMGR-3-CARD_MISMATCH: Mismatch: line card %d is
type %s - type %s required.
CHM_CARD_PROBLEM
CHM_ALARM_CUTOFF
CHM_SFM_UP
CHM_SFM_DOWN
CHM_RPM_UP
%RAM-6-RPM_STATE: RPM1 is in Active State
%RAM-6-RPM_STATE: RPM0 is in Standby State
CHM_RPM_DOWN
%CHMGR-2-RPM_DOWN: RPM 0 down - hard reset
%CHMGR-2-RPM_DOWN: RPM 0 down - card removed
CHM_RPM_PRIMARY
%RAM-5-COLD_FAILOVER: RPM Failover Completed
%RAM-5-HOT_FAILOVER: RPM Failover Completed
%RAM-5-FAST_FAILOVER: RPM Failover Completed
CHM_SFM_ADD
%TSM-5-SFM_DISCOVERY: Found SFM 1
CHM_SFM_REMOVE
%TSM-5-SFM_REMOVE: Removed SFM 1
CHM_MAJ_SFM_DOWN
%CHMGR-0-MAJOR_SFM: Major alarm: Switch fabric down
CHM_MAJ_SFM_DOWN_CLR
1396
Trap Type Trap Option
SNMP NONE
NONE NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE
ENVMON NONE