Ip Multicast-Lag-Hashing - Dell Force10 Z9000 Reference Manual

Parameters
destination
mask
null 0
protocol
[
process-id | tag ]
[
ip-address ]
static
ip-address
distance
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.7.0
E-Series legacy
command
Related show ip mroute
Commands

ip multicast-lag-hashing

Distribute multicast traffic among port channel members in a round-robin fashion.
E-Series
Syntax ip multicast-lag-hashing
To revert to the default, use the no ip multicast-lag-hashing command.
1010
Enter the IP address in dotted decimal format of the destination
device.
Enter the mask in slash prefix formation ( /x ) or in dotted decimal
format.
(OPTIONAL) Enter the keyword null followed by zero (0).
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number followed by the IP address in
dotted decimal format of the reverse path forwarding (RPF)
neighbor. The range is 1 to 65535.
• Enter the OSPF process identification number followed by the
IP address in dotted decimal format of the RPF neighbor. the
range is 1 to 65535.
• Enter the IS-IS alphanumeric tag string followed by the IP
address in dotted decimal format of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the RPF
neighbor.
ip-address
(OPTIONAL) Enter the Static IP address in dotted decimal format of
the RPF neighbor.
(OPTIONAL) Enter the IP address in dotted decimal format of the RPF
neighbor.
(OPTIONAL) Enter a number as the distance metric assigned to the
mroute. The range is 0 to 255.
Introduced on the S4810.
– views the E-Series routing table.