Auto-Cost - Dell Force10 Z9000 Reference Manual

Defaults Disabled.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage Use this command to configure all routers and access servers within a stub.
Information
Related
router ospf
Commands

auto-cost

Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type, use the no
auto-cost [reference-bandwidth] command.
Parameters
ref-bw
Defaults 100 megabits per second.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
1040
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– enters ROUTER OSPF mode to configure an OSPF instance.
(OPTIONAL) Specify a reference bandwidth in megabits per second.
The range is 1 to 4294967. The default is 100 megabits per second.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.