Dell Force10 Z9000 Reference Manual page 1217

Usage
Information
Example
FTOS#sh cam layer3-qos interface gigabitethernet 2/1
(Interface)
Cam Port Dscp Proto Tcp Src
Index
-----------------------------------------------------------
23488 1
FTOS#
Example
FTOS#show cam layer3-qos linecard 13 port-set 0
(Linecard)
Cam
Queue
Index
---------------------------------------------------------------
24511 1
TRUST-DSCP
24512 1
FTOS#
Example (Without
FTOS#sh cam layer3-qos interface gigabitethernet 2/1
Trust)
Cam
Queue
Index
--------------------------------------------------------------
23488 1
23489 1
23490 1
23491 1
23492 1
24511 1
FTOS#
Example
FTOS#show cam layer3-qos linecard 13 port-set 0 summary
(Summary)
Total number of CAM entries for Port-Set 0 is 100
FTOS#
NOTE:
• The entry TRUST-DSCP in the Queue column indicates that the trust diffserv is
configured on the policy-map.
• A hyphen (-) entry in the DSCP Marking column indicates that there is no DSCP
marking.
• In the Proto column (Protocol), IP, ICMP, UDP, and TCP strings are displayed. For
other protocols, the corresponding protocol number is displayed.
Flag Port Port
0 0 0x0
Port Dscp Proto Tcp
0 TCP
0 UDP
Port Dscp Proto Tcp
56 0
48 0
40 0
0 IP
0 IP
0 0
Dst SrcIp
0 0 0.0.0.0/0
Src Dst SrcIp
Flag Port Port
0x5 2 5 1.0.0.1/24 2.0.0.2/24-
0x2 2 5 8.0.0.8/24 8.0.0.8/24 23 3
Src Dst SrcIp
Flag Port Port
0x0 0 0 0.0.0.0/0
0x0 0 0 0.0.0.0/0
0x0 0 0 0.0.0.0/0
0x0 0 0 10.1.1.1/32 20.1.1.1/32 - 0
0x0 0 0 10.1.1.1/32 20.1.1.2/32 - 0
0x0 0 0 0.0.0.0/0
DstIp DSCP Queue
Marking
0.0.0.0/0-TRUST-DSCP
DstIp DSCP
Marking
DstIp DSCP
Marking
0.0.0.0/0 - 7
0.0.0.0/0 - 6
0.0.0.0/0 - 5
0.0.0.0/0 - 0
1217