Service-Policy Output - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

policy-map-input

service-policy output

Apply an output policy map to the selected interface.

C-Series, E-Series, S-Series, Z-Series, S4810

service-policy output policy-map-name

To remove the output policy map from the interface, use the no service-policy

output policy-map-name command.

policy-map-name

Command Modes

Command History

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

A single policy-map can be attached to one or more interfaces to specify the service-policy for

those interfaces. A policy map attached to an interface can be modified.

policy-map-output

NOTE: The service-policy commands are not allowed on a port channel. The

service-policy input policy-map-name command and the service-

class dynamic dot1p command are not allowed simultaneously on an interface.

However, the service-policy input command (without the policy-map-name

option) and the service-class dynamic dot1p command are allowed on an

– creates an input policy map.

Enter the name for the policy map in character format (16 characters

maximum). You can identify an existing policy map or name one that

does not yet exist.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the C-Series and S-Series.

Introduced on the E-Series.

– creates an output policy map.