Rate-Shape - Dell Force10 Z9000 Reference Manual

Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Related
rate police
Commands
qos-policy-input

rate-shape

Shape traffic output as part of the designated policy.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax rate-shape [kbps] rate [burst-KB]
Parameters
kbps
rate
burst-KB
Defaults Burst size is 10 KB. Granularity for rate is Mbps unless you use the kbps option.
Command Modes QOS-POLICY-OUT
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
1210
Introduced on the Z9000.
Introduced on the S4810.
Added the kbps option on the C-Series, E-Series, and S-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– specifies traffic policing on the selected interface.
– creates a QoS output policy.
Enter the keyword kbps to specify the rate limit in Kilobits per
second (Kbps). On C-Series and S-Series, make the following value a
multiple of 64. The range is 0 to 10000000. The default granularity is
Megabits per second (Mbps).
Enter the outgoing rate in multiples of 10 Mbps. The range is 10 to
10000.
(OPTIONAL) Enter the burst size in KB. The range is 0 to 10000. The
default is 10.
Introduced on the Z9000.
Introduced on the S4810.
Added the kbps option on the C-Series, E-Series, and S-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.