Disable Bgp Peer-Group - Extreme Networks ExtremeWare Command Reference Manual

disable bgp peer-group

disable bgp peer-group <peer group> {soft-in-reset}
{remove-private-AS-numbers}
Description
Disables a BGP peer group and all the neighbors of the peer group.
Syntax Description
peer group
soft-in-reset
remove-private-AS-numbers
Default
N/A.
Usage Guidelines
You can use BGP peer groups to group together up to 200 BGP neighbors. All neighbors within the peer
group inherit the parameters of the BGP peer group. The following mandatory parameters are shared
by all neighbors in a peer group:
• remote AS
• source-interface
• out-nlri-filter
• out-aspath-filter
• out-route-map
• send-community
• next-hop-self
Example
The following command disables the BGP peer group external and all of its neighbors:
disable bgp peer-group external
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a peer group.
Specifies the soft input reset feature.
Specifies to remove private AS numbers.
disable bgp peer-group
1105