Config Inline-Power Violation-Precedence - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands

config inline-power violation-precedence

config inline-power violation-precedence [advertised-class | operator-limit
| max-class-operator | none] ports <portlist>
Description
Sets the violation precedence for the specified ports
Syntax Description
advertised-class
operator-limit
max-class-operator
none
portlist
Default
max-class-operator
Usage Guidelines
This command sets the violation precedence for the specified ports. Power will be removed or denied to
PDs connected to the selected ports if the PD consumes more power than the entered limit. The default
value is
max-class-operator
greater value of the detected class limit or the configured operator limit, whichever is greater. The
operator limit is configured with the following command:
config inline-power operator-limit <milliwatts> ports <portlist>
Example
The following command sets the violation precedence for port 3 on slot 5 to the configured operator
limit:
config inline-power violation-precedence operator-limit ports 5:3
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
1910
Removes or denies power if an IEEE 802.3af-compliant power device (PD)
consumes power beyond its advertised class limit.
Removes or denies power if the PD consumes power beyond the configured
operator limit.
Removes or denies power if the PD consumes power beyond the detected
class limit or the operator limit, whichever is greater. Max-class-operator is the
default value.
Removes or denies power if the PD exceeds the maximum limit of 20 watts.
Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
, which removes or denies power if the PD consumes power beyond the
.
ExtremeWare Software 7.3.0 Command Reference Guide