Mark Cos - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Note: The CLI mode is changed to Policy-Class-Map Config when this command
Format
Mode
13.4.5.1 no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy.
Note: This command removes the reference to the class definition for the
Format
Mode

13.4.6 mark cos

This command marks all packets for the associated traffic stream with the specified class
of service value in the priority field of the 802.1p header (the only tag in a single tagged
packet or the first or outer 802.1Q tag of a double VLAN tagged packet). If the packet
does not already contain this header, one is inserted. The CoS value is an integer in the
range of 0 to 7.
Default
Format
Mode
Incompatibilities
Quality of Service (QoS) Commands
is successfully executed.
class <classname>
Policy-Map Config
is the names of an existing DiffServ class.
<classname>
specified policy.
no class <classname>
Policy-Map Config
1
mark-cos <0-7>
Policy-Class-Map Config
Drop, Mark IP DSCP, IP Precedence, Police
v1.0, October 2008
13-19