Knowledge Required For Setting Parameters - Omron K3HB-C User Manual

Section 5 Functions and Operations

Knowledge Required for Setting Parameters

■ About Levels
Important
Depending on the level,
measurements may continue
to be executed or may be
stopped. Check under the
"Measurement operations"
column.
5-2
Levels are groups of parameters.
Levels for the K3HB are classified as follows:
Level
Makes settings to prevent inadvertent
key operations. Movement between
Protect levels and changes to settings may be
prohibited, depending on the protect
settings.
The normal operation mode where
inputs are read and comparative
judgements are made.
In RUN level, the present value can be
RUN displayed, comparative set values
checked, and forced-zero executed or
cleared.
The K3HB is in RUN mode immediately
after the power is turned ON.
Switches banks and makes settings,
Adjustment
such as communications write settings.
Makes initial settings, such as the input
Initial setting type, scaling, and comparative output
patterns.
Input adjustment Adjusts inputs.
Enables/disables comparative set value
Display displays, and sets the display refresh
adjustment periods, display color, and position
meter.
Prescale Sets the prescale bank.
Comparative set Makes comparative set value bank
value settings.
Linear output Sets the linear output.
Communications Sets the baud rate, data length, and
setting other communications settings.
Sets test measurement values to
Output test
perform output tests.
Advanced Used for advanced customization.
function settings
Measurement
Function
operations
Executed
Stopped