Table of Contents
Advertisement
Call Coverage
Call Coverage
The Call Coverage feature provides the functionality for stations to
answer calls for other stations by utilizing call coverage buttons.
Visual and Audible status of ringing stations to an assigned
coverage station are provided. Multiple coverage stations can have
the same remote ringing station(s) programmed on their stations.
Once a coverage station answers the call, other stations attempting
to answer the call receive a busy tone and the call coverage button
extinguishes on all appearances of that button.
The Call Coverage button also functions as a DSS/BLF button for
the covered station; therefore, when the Call Coverage button is
pressed, the covered station is called. Also, when the covered
station goes off hook, the Call Coverage button's BLF is lit.
Direct CO calls have ring and LCD priority over call coverage calls.
The coverage station must have a direct CO appearance or Loop
button in order to pick up an external call. If the coverage station is
in DND, no audible ringing occurs, however visual and LCD
information is presented.
To assign a Call Coverage Button:
1.
Press SPEED + SPEED.
2.
Then press the desired flexible button.
3.
Dial [647] for Non-Ringing or [646] for Ringing, followed by
the station number to cover. A confirmation tone will sound.
After button is assigned, and that station receives a call:
1.
After a programmable period of time, you will receive an
audible and/or visual indications: an internal ring tone, and/
or the same flash rate as the incoming CO line ringing rate.
STSe Station User Guide
19
August 2005
Advertisement
Table of Contents
