Line Queuing; Preferred Line Answer - Vodavi Starplus Triad-S System Programming Manual

Page A Introduction

Line Queuing

Preferred Line Answer

Technical Manuals Online! - http://www.tech-man.com
Description
Stations can be individually allowed or denied the ability to use system
speed dial (100–999) numbers. (System speed numbers 060-099 are not
monitored by toll restriction.) Stations cannot be prevented from using
station speed dial. By default, System Speed Dialing is enabled at all
stations.
When upgrading from FP2 to FP3, all previously programmed speed dial
buttons will be lost.
Programming Steps
1. Press the QUEUING flexible button (FLASH 50, Page A, Button #7).
The following message displays:
LIN E QU EU ING
EN AB LE D
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
Stations can be allowed or denied the ability to manually queue for a
busy group of CO lines. Even when disabled, stations have automatic LCR
queuing privileges. By default, CO Line Queuing is enabled at all stations.
Programming Steps
1. Press the PREF LINE ANSWER flexible button (FLASH 50, Page A,
Button #8). The following message displays:
P RE F L INE A N SWE R
EN AB LE D
0- 1
0- 1
4-9