Traffic Redirect; Configuring Wan Backup; Figure 44 Traffic Redirect Example; Figure 45 Traffic Redirect Lan Setup - ZyXEL Communications P-660HW-D User Manual

Adsl 2+ 4-port
Hide thumbs Also See for P-660HW-D:
Table of Contents

Advertisement

5.7 Traffic Redirect

Traffic redirect forwards traffic to a backup gateway when the ZyXEL Device cannot connect
to the Internet. An example is shown in the figure below.

Figure 44 Traffic Redirect Example

The following network topology allows you to avoid triangle route security issues when the
backup gateway is connected to the LAN. Use IP alias to configure the LAN into two or three
logical networks with the ZyXEL Device itself as the gateway for each LAN network. Put the
protected LAN in one subnet (Subnet 1 in the following figure) and the backup gateway in
another subnet (Subnet 2). Configure filters that allow packets from the protected LAN
(Subnet 1) to the backup gateway (Subnet 2).

Figure 45 Traffic Redirect LAN Setup

5.8 Configuring WAN Backup

To change your ZyXEL Device's WAN backup settings, click Network > WAN > WAN
Backup Setup. The screen appears as shown.
P-660HW-D User's Guide
Chapter 5 WAN Setup
85

Advertisement

Table of Contents
loading

Table of Contents