The Log Settings Screen - ZyXEL Communications P-793H v3 User Manual

Figure 122 Maintenance > Logs > View Log
The following table describes the fields in this screen.
Table 84 Maintenance > Logs > View Log
LABEL
Display
Email Log Now
Refresh
Clear Log
#
Time
Message
Source
Destination
Notes

22.3 The Log Settings Screen

Use the Log Settings screen to configure the mail server, the syslog server, when to send logs and
what logs to send.
To change your P-79X's log settings, click Maintenance > Logs > Log Settings. The screen
appears as shown.
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full.
Selecting many alert and/or log categories (especially Access Control) may result in many e-mails
being sent.
Chapter 22 Logs
DESCRIPTION
The categories that you select in the Log Settings screen display in the drop-
down list box.
Select a category of logs to view; select All Logs to view logs from all of the log
categories that you selected in the Log Settings page.
Click this to send the log screen to the e-mail address specified in the Log
Settings page (make sure that you have first filled in the E-mail Log Settings
fields in Log Settings).
Click this to renew the log screen.
Click this to delete all the logs.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming packet.
This field lists the destination IP address and the port number of the incoming
packet.
This field displays additional information about the log entry.
P-79X Series User's Guide
207