Table of Contents
Advertisement
Chapter 6 Monitor
The log wraps around and deletes the old entries after it fills.
Figure 22 Monitor > Log > View Log
The following table describes the fields in this screen.
Table 14 Monitor > Log > View Log
LABEL
Display
Refresh
Clear Log
Summary
#
Time
Message
6.3 The Log Settings Screen
Use the Log Settings screen to choose which categories of events and/or alerts
the NVG2053 is to log and then display the logs. To change your NVG2053's log
settings, click Monitor > Log > Log Settings. The screen appears as shown.
Figure 23 Monitor > Log > Log Settings
76
DESCRIPTION
Select a category of logs to view. Select All Logs to view logs from all of
the log categories that you selected in the Log Settings screen.
Click Refresh to renew the log screen.
Click Clear Log to delete all the logs.
The logs display in the table.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
This field states the reason for the log.
NVG2053 User's Guide
Advertisement
Table of Contents
