Table of Contents
Advertisement
Table 36 Network > DHCP Server > Advanced (continued)
LABEL
First DNS Server
Second DNS Server
Third DNS Server
Apply
Cancel
11.4 DHCP Client List Screen
The DHCP table shows current DHCP client information (including IP Address, Host Name and MAC
Address) of network clients using the EMG3425-Q10A's DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click
Network > DHCP Server > Client List.
Note: You can also view a read-only client list by clicking Monitor > DHCP Server.
Figure 54 Network > DHCP Server > Client List
The following table describes the labels in this screen.
Table 37 Network > DHCP Server > Client List
LABEL
#
Status
Host Name
IP Address
Chapter 11 DHCP Server
DESCRIPTION
Select Obtained From ISP if your ISP dynamically assigns DNS server information
(and the EMG3425-Q10A's WAN IP address). The field to the right displays the (read-
only) DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's
IP address in the field to the right.
Select DNS Relay to have the EMG3425-Q10A act as a DNS proxy. The EMG3425-
Q10A's LAN IP address displays in the field to the right (read-only). The EMG3425-Q10A
tells the DHCP clients on the LAN that the EMG3425-Q10A itself is the DNS server. When
a computer on the LAN sends a DNS query to the EMG3425-Q10A, the EMG3425-Q10A
forwards the query to the EMG3425-Q10A's system DNS server (configured in the WAN
screen) and relays the response back to the computer. You can only select DNS Relay
for one of the three servers; if you select DNS Relay for a second or third DNS server,
that choice changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IP address of a computer in order to access it.
Click Apply to save your changes back to the EMG3425-Q10A.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This is the index number of the host computer.
This field displays whether the connection to the host computer is up (a yellow bulb) or
down (a gray bulb).
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
EMG3425-Q10A User's Guide
97
Advertisement
Table of Contents
