The Client List Screen; The Ip Alias Screen; Figure 35 Lan > Client List; Table 16 Lan > Client List - ZyXEL Communications P-870HW-51a v2 User Manual

Chapter 6 LAN Setup

6.5 The Client List Screen

This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Click Network > LAN > Client List to open the following screen. Use this screen to change
your ZyXEL Device's static DHCP settings.
Figure 35 LAN > Client List
The following table describes the labels in this screen.
Table 16 LAN > Client List
LABEL
IP Address
MAC Address
Add Entries
#
IP Address
MAC Address
Remove
Apply

6.6 The IP Alias Screen

IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The ZyXEL Device supports three logical LAN interfaces via its
single physical Ethernet interface with the ZyXEL Device itself as the gateway for each LAN
network.
When you use IP alias, you can also configure firewall rules to control access between the
LAN's logical networks (subnets).
70
DESCRIPTION
Enter the IP address that you want to assign to the computer on your LAN with
the MAC address that you will also specify.
Enter the MAC address of a computer on your LAN.
Click this to add a static DHCP entry.
This is the index number of the static IP table entry (row).
This field displays the IP address relative to the # field listed above.
The MAC (Media Access Control) or Ethernet address on a LAN (Local Area
Network) is unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address
that is assigned at the factory. This address follows an industry standard that
ensures no other adapter has a similar address.
Click this to delete a static DHCP entry. You cannot delete a dynamic DHCP entry.
Click this to save your changes back to the ZyXEL Device.
P-870HW-51a v2 User's Guide