Lan Advanced Screen - ZyXEL Communications MAX-200M1 Series User Manual

Table 24 Network > LAN > IP Alias
LABEL
RIP Direction
RIP Version
Apply
Reset

8.2.6 LAN Advanced Screen

Use this screen to activate or deactivate the Any IP feature. You can also control what routing
information is sent and received by each subnet. To access this screen, click Network > LAN
> Advanced.
Chapter 8 LAN
DESCRIPTION
Use this field to control how much routing information the ZyXEL Device sends and
receives on the subnet.
None - The ZyXEL Device does not send or receive routing information on the
subnet.
Both - The ZyXEL Device sends and receives routing information on the subnet.
In Only - The ZyXEL Device only receives routing information on the subnet.
Out Only - The ZyXEL Device only sends routing information on the subnet.
Select which version of RIP the ZyXEL Device uses when it sends or receives
information on the subnet.
RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.
RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing information.
RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.
Click this to save your changes.
Click this to set every field in this screen to its default value.
ZyXEL MAX-200M1 Series User's Guide
93